Clogged drains are a problem for several people, as substances like food particles, hair, and other blockage can make a sink or toilet overflow. With a little prevention and purchasing a product like Dran-O, you can try plumbing by yourself. Read this article for some tips on how to do plumbing yourself.
Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
Do not be surprised if a plumber charges you more than you expected. Many customers think that fixing a toilet or other drainage problem should be easy, therefore the price should be low. You must remember that not only does a plumber have to charge for labor, but they have to charge for parts that you need.
Hiring a plumber can be an expensive endeavor, and it may be unnecessary. Simple problems like clogged drains can be fixed at home without hiring a professional. Remember the tips in this article if you are having trouble with a sink or toilet overflowing or you need to clear a drain.